Possible error in Figure 3.1

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Possible error in Figure 3.1

Jonathan Katz
I'm not sure if this is a mistake or not, but anyway I found it slightly confusing. In the picture of the 1-bit register in Figure 3.1, 'in' should be selected when 'load' is set. But in Figure 1.8 of a Mux, the *bottom-most* input is selected when 'sel' is set.
Loading...